View XC6419AD18EL_4269626.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

XC6419 Series
Dual LDO Regulator (ch1=300mA, ch2=100mA) with ON/OFF Switch
ETR0338-003
GENERAL DESCRIPTION
The XC6419 series is a dual CMOS LDO regulator. The series features high accuracy, low output noise, high ripple rejection and low dropout and consists of a voltage reference, error amplifier, driver transistor, current limiter, thermal shutdown circuit and phase compensation circuit. Each output voltage is set independently by laser trimming and selectable in 0.05V increments within a range of 0.8 to 5.0V. The EN function turns each output of the two regulators off independently. In this state, the electric charge at the output capacitor (CL) is discharged via the internal auto-discharge switch, and as a result the VOUT voltage quickly returns to the VSS level. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance. VR1 and VR2 are completely isolated so that a cross talk during load fluctuations is minimized.
APPLICATIONS
Mobile phones Cordless phones, Wireless communication equipment Portable games Digital still cameras, Digital video cameras Portable audio equipment PDAs
FEATURES
Input Voltage Range Maximum Output Current Output Voltage Range Output Accuracy : : : : 1.56.0V ch1.300mA / ch2.100mA 0.85.0V 1% (XC6419A/B) 20mA@ VOUT2.0V 2% (XC6419C/D) 30mA@ VOUT1.5V ch1.115mVIOUT=200mA ch2.115mVIOUT=50mA ch1.28A / ch2.23A Less than 0.1A 60dBf=1kHz ch1.400mA / ch2.150mA
Dropout Voltage VOUT=2.8V Low Power Consumption Stand-by Current Ripple Rejection Current Limit Low ESR Capacitor CL High Speed Discharge Small Packages
: : : : :
:
USP-6C, SOT-26
TYPICAL APPLICATION CIRCUITS
6 1 2 3
TYPICAL PERFORMANCE CHARACTERISTICS
Dropout Voltage vs. Output Current 400
350 DropoutVoltage : :Vdif [mV] Dropout Voltage Vdif (mV) 300 250 200 150 100 50 0 0 50 100 150 200 250 300
Output Current : OUT (mA) OutputCurrent : IOUT [mA] ch1 1CH ch2 2CH
ch2 Maximum Output Current 2CH
VOUT=2.8V VOUT=2.8V
85 25 -40
5 4
100mA
ch1 Maximum Output Current 1CH
300mA
1/29
XC6419 Series
PIN CONFIGURATION
*The dissipation pad for the USP-6C package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. connected to the VSS (No. 4) pin. If the pad needs to be connected to other pins, it should be
PIN ASSIGNMENT
PIN NUMBER SOT-26 1 2 3 4 5 6 USP-6C 3 2 1 6 4 5 PIN NAME EN1 VIN EN2 VOUT2 VSS VOUT1 FUNCTIONS : ON/OFF Control 1 : Power Input : ON/OFF Control 2 : Output 2 : Ground : Output 1
PRODUCT CLASSIFICATION
Ordering Information
XC6419 DESIGNATOR DESCRIPTION VR1 SYMBOL A B C D A B C D 01 M E R L DESCRIPTON : EN High Active without CL auto discharge (Accuracy:1%) : EN High Active with CL auto discharge (Accuracy:1%) : EN High Active without CL auto discharge (Accuracy:2%) : EN High Active with CL auto discharge (Accuracy:2%) : EN High Active without CL auto discharge (Accuracy:1%) : EN High Active with CL auto discharge (Accuracy:1%) : EN High Active without CL auto discharge (Accuracy:2%) : EN High Active with CL auto discharge (Accuracy:2%) : Sequential number showing VR1 and VR2 voltage combination VR1 range: 0.8 ~ 5.0V , VR2 range : 0.8 ~ 5.0V (0.05V increments) Refer to the table below : SOT-26 : USP-6C : Embossed tape, standard feed : Embossed tape, reverse feed
VR2
DESIGNATOR VR1 01 02 03 04 05 06 07 08 09 10 1.80 1.20 1.80 1.50 2.85 1.80 3.00 2.80 1.20 1.10
Output Voltage Packages Device Orientation
VR2 2.80 2.90 1.80 2.70 2.85 3.30 3.00 1.80 1.20 1.30
11 12 13 14 15 16 17 18 19 20
VR1 1.30 2.80 2.50 3.00 1.20 2.80 3.30 3.10 2.80 1.30
VR2 1.50 2.80 3.30 3.30 1.80 3.30 3.30 3.10 1.50 2.80
21 22 23 24 25 26 27 28 29 30
VR1 1.50 1.80 1.85 1.85 2.60 1.50 2.00 3.30 3.30 2.10
VR2 2.80 3.00 2.80 3.30 2.80 1.50 3.00 1.80 1.75 4.10
2/29
*For other combinations, please ask Torex sales contacts.
XC6419
Series
BLOCK DIAGRAMS
* Diodes inside the circuits are ESD protection diodes and parasitic diodes.
ABSOLUTE MAXIMUM RATINGS
Ta=25
PARAMETER Input Voltage Output Current Output Voltage 1 / Output Voltage 2 EN1/EN2 Input Voltage Power Dissipation USP-6C
SYMBOL VIN IOUT1+IOUT2 VOUT1 /VOUT2 VEN1 /VEN2 Pd Topr Tstg
SOT-26 Operating Temperature Range Storage Temperature Range
RATINGS - 0.3 ~ + 6.5 500 (*1) VSS - 0.3 ~ VIN + 0.3 VSS - 0.3 ~ + 6.5 120 (*2) 1000 PCB mounted 250 - 40 ~ + 85 - 55 ~ + 125
UNITS V mA V V mW
*1: Please use within the range of Pd > { (VIN-VOUT1)xIOUT1 + (VIN-VOUT2)xIOUT2 } *2: This power dissipation figure shown is PCB mounted and is for reference only. Please refer to page 28 for details.
3/29
XC6419 Series
ELECTRICAL CHARACTERISTICS
XC6419 Series
Regulator 1 PARAMETER SYMBOL CONDITIONS VOUT(T)2.0V (A, B Series), VEN1=VIN, IOUT=10mA VOUT1.95V(A, B Series), VEN1=VIN, IOUT=10mA VOUT(T)1.5VC, D Series) VEN1=VIN, IOUT=10mA VOUT1.5V C, D Series) VEN1=VIN, IOUT=10mA VEN1=VIN, 0.1mAIOUT200mA IOUT=200mA, VEN1=VIN VIN=VEN1=VOUT(T)+1.0V, IOUT=0A VIN=6.0V, VEN1=VSS VOUT(T)+0.5VVIN6.0V VOUT(T)1.0V VEN1=VIN, IOUT=10mA 1.5VVIN6.0V VOUT(T)0.95V VEN1=VIN, IOUT=10mA VEN1=VIN, IOUT=30mA -40Ta85 VIN=VOUT(T)+1.0VDC+0.5Vp-pAC VOUT(T)4.75V VEN1=VIN, IOUT=30mA, f=1kHz VIN=5.75VDC+0.5Vp-pAC VOUT(T)4.8V VEN1=VIN, IOUT=30mA, f=1kHz VEN1=VIN VEN1=VIN, Short VOUT to VSS level MIN. x0.99
(*3)
Ta=25 TYP. MAX. x1.01
(*3)
UNITS
CIRCUITS
-0.02
(*3)
+0.02 VOUT(T)
(*4) (*3)
Output Voltage
VOUT(E)
(*2)
x0.98
(*3)
x1.02
(*3)
V
-0.03
(*3)
+0.03
(*3)
Output Current Load Regulation Dropout Voltage (*5) Supply Current Stand-by Current
IOUTMAX VOUT Vdif ISS ISTBY
300 Refer to table E-11 Refer to table E-12 28 70 0.01 0.1
mA mV mV A A

Line Regulation
VOUT VINVOUT
0.01
0.20
%/V
Input Voltage Output Voltage Temperature Characteristics
VIN VOUT TaVOUT
1.5 100
6.0
V ppm/

Ripple Rejection Rate
PSRR
60
dB
Limit Current Short Current EN "H" Level Voltage EN "L" Level Voltage EN "H" Level Current EN "L" Level Current CL Discharge Resistor (*8)
ILIM ISHORT VENH VENL IENH IENL RDCHG
310 1.2
400 30 6.0 0.3 0.1 0.1 550
VEN1=VIN VEN1=VSS VIN=6.0V, VOUT=4.0V, VEN1= VSS
-0.1 -0.1
mA mA V V A A

NOTE: *1: Unless otherwise stated, VIN=VOUT (T) +1.0V, VEN2=0V. *2: VOUT (E) = Actual output voltage (refer to the voltage table) (ie. The output voltage when "VOUT (T) +1.0V" is provided at the VIN pin while maintaining a certain IOUT value. *3: Characteristics of the actual VOUT (E) by nominal output voltage is shown in the voltage table. *4: VOUT (T) is nominal output voltage (*7) (*6) *5: Vdif = VIN1 VOUT3 *6: VOUT 3 is a voltage equal to 98% of the VOUT (T) when an amply stabilized input voltage is applied in VOUT (T) +1.0V. *7: VIN1 is the input voltage when VOUT3 appears while input voltage is gradually decreased. *8: For XC6419Bx/Dx series only. XC6419Ax/Cx series discharge with only Rx1 and Rx2 resistors as shown in the BLOCK DIAGRAMS.
4/29
XC6419
Series
ELECTRICAL CHARACTERISTICS (Continued)
XC6419 Series
Regulator 2 PARAMETER SYMBOL CONDITIONS VOUT(T)2.0V (A, B Series), VEN2=VIN, IOUT=10mA VOUT1.95V (A, B Series), VEN2=VIN, IOUT=10mA VOUT(T)1.5VC, D Series) VEN2=VIN, IOUT=10mA VOUT1.5V C, D Series) VEN2=VIN, IOUT=10mA VEN2=VIN, 0.1mAIOUT50mA IOUT=50mA, VEN2=VIN VIN=VEN2=VOUT(T)+1.0V, IOUT=0A VIN=6.0V, VEN2=VSS VOUT(T)+0.5VVIN6.0V VOUT(T)1.0V VEN2=VIN, IOUT=10mA 1.5VVIN6.0V VOUT(T)0.95V VEN2=VIN, IOUT=10mA VEN2=VIN, IOUT=30mA -40Ta85 VIN=VOUT(T)+1.0 VDC+0.5Vp-pAC VOUT(T)4.75V VEN2=VIN, IOUT=30mAf=1kHz VIN=5.75VDC+0.5Vp-pAC VOUT(T)4.8V VEN2=VIN, IOUT=30mA, f=1kHz VEN2=VIN VEN2=VIN, Short VOUT to VSS level MIN. x0.99
(*3)
Ta=25
TYP.
MAX. x1.01
(*3)
UNITS
CIRCUITS
-0.02
(*3)
+0.02 VOUT(T)
(*4) (*3)
Output Voltage
VOUT(E)
(*2)
x0.98
(*3)
x1.02
(*3)
V
-0.03
(*3)
+0.03
(*3)
Output Current Load Regulation Dropout Voltage (*5) Supply Current Stand-by Current
IOUTMAX VOUT Vdif ISS ISTBY
100 Refer to table E-21 Refer to table E-22 23 60 0.01 0.1
mA mV mV A A
Line Regulation
VOUT VIN VOUT
0.01
0.20
%/V
Input Voltage Output Voltage Temperature Characteristics
VIN VOUT Ta VOUT
1.5 100
6.0
V ppm/
Ripple Rejection Rate
PSRR
60
dB
Limit Current Short Current EN "H" Level Voltage EN "L" Level Voltage EN "H" Level Current EN "L" Level Current CL Discharge Resistor (*8)
ILIM ISHORT VENH VENL IENH IENL RDCHG
110 1.2
150 15 6.0 0.3 0.1 0.1 550
VEN2=VIN VEN2=VSS VIN=6.0V, VOUT=4.0V, VEN2= VSS
-0.1 -0.1
mA mA V V A A
NOTE: *1: Unless otherwise stated, VIN=VOUT (T) +1.0V, VEN1=0V. *2: VOUT (E) is actual output voltage (refer to the voltage table) (ie. The output voltage when "VOUT (T) +1.0V" is provided at the VIN pin while maintaining a certain IOUT value. *3: Characteristics of the actual VOUT (E) by nominal output voltage is shown in the voltage table *4: VOUT (T) is nominal output voltage (*7) (*6) *5: Vdif = VIN1 VOUT3 *6: VOUT3 is a voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+1.0V} is input. *7: VIN1 is the input voltage when VOUT3 appears while input voltage is gradually decreased. *8: For XC6419 xB/xD series only. XC6419 xA /xC series discharge with only Rx1 and Rx2 resistors as shown in the BLOCK DIAGRAMS.
5/29
XC6419 Series
ELECTRICAL CHARACTERISTICS
REGULATOR 1 NOMINAL OUTPUT VOLTAGE (V) VOUT(T) 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 MIN 0.7800 0.8300 0.8800 0.9300 0.9800 1.0300 1.0800 1.1300 1.1800 1.2300 1.2800 1.3300 1.3800 1.4300 1.4800 1.5300 1.5800 1.6300 1.6800 1.7300 1.7800 1.8300 1.8800 1.9300 1.9800 2.0295 2.0790 2.1285 2.1780 2.2275 2.2770 2.3265 2.3760 2.4255 2.4750 2.5245 2.5740 2.6235 2.6730 2.7225 2.7720 2.8215 2.8710 2.9205 OUTPUT VOLTAGE 1% (A, B Series (V) VOUT(E) MAX 0.8200 0.8700 0.9200 0.9700 1.0200 1.0700 1.1200 1.1700 1.2200 1.2700 1.3200 1.3700 1.4200 1.4700 1.5200 1.5700 1.6200 1.6700 1.7200 1.7700 1.8200 1.8700 1.9200 1.9700 2.0200 2.0705 2.1210 2.1715 2.2220 2.2725 2.3230 2.3735 2.4240 2.4745 2.5250 2.5755 2.6260 2.6765 2.7270 2.7775 2.8280 2.8785 2.9290 2.9795 MIN 0.7700 0.8200 0.8700 0.9200 0.9700 1.0200 1.0700 1.1200 1.1700 1.2200 1.2700 1.3200 1.3700 1.4200 1.4700 1.5190 1.5680 1.6170 1.6660 1.7150 1.7640 1.8130 1.8620 1.9110 1.9600 2.0090 2.0580 2.1070 2.1560 2.2050 2.2540 2.3030 2.3520 2.4010 2.4500 2.4990 2.5480 2.5970 2.6460 2.6950 2.7440 2.7930 2.8420 2.8910 MAX 0.8300 0.8800 0.9300 0.9800 1.0300 1.0800 1.1300 1.1800 1.2300 1.2800 1.3300 1.3800 1.4300 1.4800 1.5300 1.5810 1.6320 1.6830 1.7340 1.7850 1.8360 1.8870 1.9380 1.9890 2.0400 2.0910 2.1420 2.1930 2.2440 2.2950 2.3460 2.3970 2.4480 2.4990 2.5500 2.6010 2.6520 2.7030 2.7540 2.8050 2.8560 2.9070 2.9580 3.0090 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 OUTPUT VOLTAGE 2% (C, D Series (V) TYP LOAD REGULATION E-11 (mV) VOUT MAX 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 TYP 580 580 540 540 480 480 440 440 380 380 330 330 280 280 220 220 220 200 200 190 190 190 190 170 170 170 150 150 150 150 140 140 140 140 140 140 125 125 125 125 115 115 115 115 DROPOUT VOLTAGE E-12 (mV) Vdif MAX 750 750 700 700 650 640 610 580 540 520 450 450 410 350 290 290 290 270 270 250 250 250 250 230 230 230 210 210 210 210 190 190 190 190 190 190 170 170 170 170 150 150 150 150 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 TYP REGULATOR 2 LOAD REGULATION E-21 (mV) VOUT MAX 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 TYP 590 590 540 540 480 480 420 420 350 350 300 300 280 250 220 220 220 200 200 190 190 190 190 170 170 170 150 150 150 150 140 140 140 140 140 140 125 125 125 125 115 115 115 115 DROPOUT VOLTAGE E-22 (mV) Vdif MAX 800 800 750 700 650 650 600 600 550 550 480 480 430 380 330 330 330 310 310 280 280 280 280 260 260 260 240 240 240 240 220 220 220 220 220 220 200 200 200 200 180 180 180 180
6/29
XC6419
Series
ELECTRICAL CHARACTERISTICS (Continued)
REGULATOR 1 NOMINAL OUTPUT VOLTAGE (V) VOUT(T) 3.00 3.05 3.10 3.15 3.20 3.25 3.30 3.35 3.40 3.45 3.50 3.55 3.60 3.65 3.70 3.75 3.80 3.85 3.90 3.95 4.00 4.05 4.10 4.15 4.20 4.25 4.30 4.35 4.40 4.45 4.50 4.55 4.60 4.65 4.70 4.75 4.80 4.85 4.90 4.95 5.00 MIN 2.9700 3.0195 3.0690 3.1185 3.1680 3.2175 3.2670 3.3165 3.3660 3.4155 3.4650 3.5145 3.5640 3.6135 3.6630 3.7125 3.7620 3.8115 3.8610 3.9105 3.9600 4.0095 4.0590 4.1085 4.1580 4.2075 4.2570 4.3065 4.3560 4.4055 4.4550 4.5045 4.5540 4.6035 4.6530 4.7025 4.7520 4.8015 4.8510 4.9005 4.9500 OUTPUT VOLTAGE 1% (A, B Series (V) VOUT(E) MAX 3.0300 3.0805 3.1310 3.1815 3.2320 3.2825 3.3330 3.3835 3.4340 3.4845 3.5350 3.5855 3.6360 3.6865 3.7370 3.7875 3.8380 3.8885 3.9390 3.9895 4.0400 4.0905 4.1410 4.1915 4.2420 4.2925 4.3430 4.3935 4.4440 4.4945 4.5450 4.5955 4.6460 4.6965 4.7470 4.7975 4.8480 4.8985 4.9490 4.9995 5.0500 MIN 2.9400 2.9890 3.0380 3.0870 3.1360 3.1850 3.2340 3.2830 3.3320 3.3810 3.4300 3.4790 3.5280 3.5770 3.6260 3.6750 3.7240 3.7730 3.8220 3.8710 3.9200 3.9690 4.0180 4.0670 4.1160 4.1650 4.2140 4.2630 4.3120 4.3610 4.4100 4.4590 4.5080 4.5570 4.6060 4.6550 4.7040 4.7530 4.8020 4.8510 4.9000 MAX 3.0600 3.1110 3.1620 3.2130 3.2640 3.3150 3.3660 3.4170 3.4680 3.5190 3.5700 3.6210 3.6720 3.7230 3.7740 3.8250 3.8760 3.9270 3.9780 4.0290 4.0800 4.1310 4.1820 4.2330 4.2840 4.3350 4.3860 4.4370 4.4880 4.5390 4.5900 4.6410 4.6920 4.7430 4.7940 4.8450 4.8960 4.9470 4.9980 5.0490 5.1000 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 OUTPUT VOLTAGE 2% (C, D Series (V) TYP LOAD REGULATION E-11 (mV) VOUT MAX 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 TYP 115 115 115 115 115 115 115 115 115 115 100 100 100 100 100 100 100 100 100 100 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 83 83 83 83 83 DROPOUT VOLTAGE E-12 (mV) Vdif MAX 150 150 150 150 150 150 150 150 150 150 135 135 135 135 135 135 135 135 135 135 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 115 115 115 115 115 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 TYP REGULATOR 2 LOAD REGULATION E-21 (mV) VOUT MAX 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 TYP 115 115 115 115 115 115 115 115 115 115 100 100 100 100 100 100 100 100 100 100 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 80 80 80 80 80 DROPOUT VOLTAGE E-22 (mV) Vdif MAX 180 180 180 180 180 180 180 180 180 180 170 170 170 170 170 170 170 170 170 170 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 155 155 155 155 155
7/29
XC6419 Series
OPERATIONAL DESCRIPTION
The voltage divided by resistors Rx1 and Rx2 is compared with the internal reference voltage by the error amplifier. The P-channel MOSFET connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short protect circuit operate in relation to the level of output current. Further, the IC's internal circuitry can be shutdown via the EN pin's signal.
XC6419xB/Bx/xD/Dx series can quickly discharge the electric charge at the output capacitor (CL) through the N-channel transistor located between the VOUT pin and the VSS pin (refer to the BLOCK DIAGRAM) when a low level signal is applied when VIN is 6.0V (TYP.) and VOUT is 4.0V (TYP.). Moreover, to the EN pin. The CL discharge resistance is set to 550 discharge time of the output capacitor (CL) is set by the CL auto-discharge resistance (R) and the output capacitor (CL). By setting time constant of a CL auto-discharge resistance value [R] and an output capacitor value (CL) as ( =C x R), the output voltage after discharge via the N channel transistor is calculated by the following formulae. -t/ , or = lnVOUT (E) / V V = VOUT x e where V: Output voltage after discharge, VOUT (E): Output voltage, t: Discharge time, : CL auto-discharge resistance RDCHG CL capacitance C CL high-speed discharge function can be set by each regulator. The XC6419 series includes a fold-back circuit, which aid the operations of the current limiter and circuit protection. When the load current reaches the current limit level, the fold-back circuit operates and output voltage drops. As a result of this drop in output voltage, output current also decreases. When the output pin is shorted, the output current flows go down to 30mA / ch1 and 15mA/ch2 TYP.. Each regulator can be shut-downed via the signal from the EN pin with the XC6419 series. In shutdown mode, output at the VOUT pin will be pulled down to the VSS level via Rx1 & Rx2. However, as for the XC6419xB/Bx/xD/Dx series, the CL auto-discharge resistor is connected in parallel to Rx1 and Rx2 while the power supply is applied to the VIN pin. Therefore, time until the VOUT pin reaches the VSS level becomes short. The output voltage becomes unstable, when the EN pin is open. If this IC is used with the correct output voltage for the EN pin, the logic is fixed and the IC will operate normally. However, supply current may increase as a result of through current in the IC's internal circuitry when medium
8/29
XC6419
Series
OPERATIONAL DESCRIPTION (Continued)
The XC6419 needs an output capacitor CL for phase compensation. The requested capacitance values are described in the table below. The device may go into unstable operation when the output capacitance reduction happens as a result of bias or temperature drift. Please choose a capacitor with less influence from temperature and bias. Also, please place 1.0 F input capacitor CIN between VIN and VSS pins for stabilizing input supply voltage.
SETTING VOLTAGE 0.8V 1.2V 1.15V 5.0V
OUTPUT CAPACITOR CL CL 2.2 F 1.0 F
NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be exceeded. 2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please wire the input capacitor CIN and the output capacitor CL as close to the IC as possible.
9/29
XC6419 Series
TEST CIRCUITS
Circuit
Circuit
Circuit
10/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS
* EN Voltage condition: Unless otherwise stated, VEN=VIN while the other channel is turned off (VEN=VSS.
(1)- Current (1) Output Voltage vs. Output
XC6419(VOUT1=0.8V)VR1
Ta=25, CIN=1.0F(ceramic), CL1=2.2F(ceramic)
XC6419(VOUT2=0.8V)VR2
Ta=25, CIN=1.0F(ceramic), CL2=2.2F(ceramic)
1.0 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT2 (V) 0.8 0.6 0.4
VIN=1.6V
1.0 0.8 0.6 0.4
VIN=1.6V
0.2 0.0 0
VIN=1.8V VIN=2.3V
0.2 0.0
VIN=1.8V VIN=2.3V
100 200 300 400 OutputCurrent : IOUT1 (mA)
500
0
25
50 75 100 125 150 175 200 OutputCurrent : IOUT2 (mA)
XC6419(VOUT1=1.5V)VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=1.5V)VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
1.8 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT2 (V) 1.5 1.2 0.9 0.6 0.3 0 0 100 200 300 400 OutputCurrent : IOUT1 (mA) 500
VIN=1.6V VIN=1.8V VIN=2.0V VIN=2.5V
1.8 1.5 1.2 0.9 0.6 0.3 0 0 25 50 75 100 125 150 175 200 OutputCurrent : IOUT2 (mA)
VIN=1.6V VIN=1.8V VIN=2.0V VIN=2.5V
XC6419(VOUT1=2.8V)VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=2.8V)VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
3.2 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT2 (V) 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0.0 0 100 200 300 400 OutputCurrent : IOUT1 (mA) 500
VIN=2.9V VIN=3.1V VIN=3.3V VIN=3.8V VIN=6.0V
3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0.0 0 25 50 75 100 125 150 175 200 OutputCurrent : IOUT2 (mA)
VIN=2.9V VIN=3.1V VIN=3.3V VIN=3.8V VIN=6.0V
11/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1)- Current (Continued) (1) Output Voltage vs. Output
XC6419(VOUT1=5.0V)VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=5.0V)VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
6.0 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT2 (V) 5.0 4.0 3.0 2.0 1.0 0.0 0 100 200 300 400 OutputCurrent : IOUT1 (mA) 500
VIN=5.1V VIN=5.3V VIN=5.5V VIN=6.0V
6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 25 50 75 100 125 150 175 200 OutputCurrent : IOUT2 (mA)
VIN=5.1V VIN=5.3V VIN=5.5V VIN=6.0V
(2) Output Voltage vs. Input Current (2)-
XC6419(VOUT1=0.8V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=2.2F(ceramic)
XC6419(VOUT1=0.8V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=2.2F(ceramic)
1.0 0.9 OutputVoltage : VOUT1 (V) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V) 5.0 6.0
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
0.90 OutputVoltage : VOUT1 (V) 0.85 0.80 0.75 0.70 0.65 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 InputVoltage : VIN (V) 5.5 6.0
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
0.8
XC6419(VOUT2=0.8V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=2.2F(ceramic)
XC6419(VOUT2=0.8V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=2.2F(ceramic)
1.0 0.9 OutputVoltage : VOUT2 (V) OutputVoltage : VOUT2 (V) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V) 5.0 6.0
IOUT2=1mA IOUT2=10mA IOUT2=30mA
0.90 0.85 0.80 0.75
IOUT2=1mA
0.70 0.65 1.5 2.0 2.5
IOUT2=10mA IOUT2=30mA
3.0 3.5 4.0 4.5 5.0 InputVoltage : VIN (V)
5.5
6.0
12/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Current (Continued) (2)-
XC6419(VOUT1=1.5V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT1=1.5V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
2.0 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT1 (V)
1.60 1.55 1.50 1.45 1.40 1.35
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
1.5
1.0
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
0.5
0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V) 5.0 6.0
2.5
3.0
3.5 4.0 4.5 5.0 InputVoltage : VIN (V)
5.5
6.0
XC6419(VOUT2=1.5V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
XC6419(VOUT2=1.5V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
2.0 OutputVoltage : VOUT2 (V) OutputVoltage : VOUT2 (V)
1.60 1.55 1.50 1.45
IOUT2=1mA
1.5
1.0
0.5
IOUT2=1mA IOUT2=10mA IOUT2=30mA
1.40 1.35
IOUT2=10mA IOUT2=30mA
0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V) 5.0 6.0
2.5
3.0
3.5 4.0 4.5 5.0 InputVoltage : VIN (V)
5.5
6.0
XC6419(VOUT1=2.8V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT1=2.8V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
3.2 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT1 (V) 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V) 5.0 6.0
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
2.90 2.85 2.80 2.75 2.70 2.65 3.5 4.0 4.5 5.0 5.5 InputVoltage : VIN (V) 6.0
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
13/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Current (Continued) (2)-
XC6419(VOUT2=2.8V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
XC6419(VOUT2=2.8V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
3.2 OutputVoltage : VOUT2 (V) OutputVoltage : VOUT2 (V) 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V) 5.0 6.0
IOUT2=1mA IOUT2=10mA IOUT2=30mA
2.90 2.85 2.80 2.75 2.70 2.65 3.5 4.0 4.5 5.0 5.5 InputVoltage : VIN (V) 6.0
IOUT2=1mA IOUT2=10mA IOUT2=30mA
XC6419(VOUT1=5.0V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT1=5.0V) VR1
Ta=25, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
6.0 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT1 (V) 5.0 4.0 3.0 2.0 1.0 0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V) 5.0 6.0
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
5.10 5.05 5.00 4.95 4.90 4.85 5.2 5.4 5.6 5.8 InputVoltage : VIN (V) 6
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
XC6419(VOUT2=5.0V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
XC6419(VOUT2=5.0V) VR2
Ta=25, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
6.0 OutputVoltage : VOUT2 (V) OutputVoltage : VOUT2 (V) 5.0 4.0 3.0 2.0
IOUT2=1mA
5.10 5.05 5.00 4.95
IOUT2=1mA
1.0 0.0 0.0 1.0 2.0 3.0 4.0 InputVoltage : VIN (V)
IOUT2=10mA IOUT2=30mA
4.90 4.85
IOUT2=10mA IOUT2=30mA
5.0
6.0
5.2
5.4 5.6 5.8 InputVoltage : VIN (V)
6
14/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3)- (3) Dropout Voltage vs. Output Current
XC6419(VOUT1=0.8V) VR1
CIN=1.0F(ceramic), CL1=2.2F(ceramic)
XC6419(VOUT2=0.8V) VR2 1.0 0.9 DropoutVoltage : Vdif (V) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 300 0
Ta=85 Ta=25 Ta=-40 CIN=1.0F(ceramic), CL2=2.2F(ceramic)
1.0 0.9 DropoutVoltage : Vdif (V) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 50 100 150 200 250 OutputCurrent : IOUT1 (mA)
Ta=85 Ta=25 Ta=-40 Below the minimum operating
Below the minimum operating
20 40 60 80 OutputCurrent : IOUT2 (mA)
100
XC6419(VOUT1=1.5V) VR1
CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=1.5V) VR2
CIN=1.0F(ceramic), CL2=1.0F(ceramic)
0.5
Ta=85
0.5
Ta=85
DropoutVoltage : Vdif (V)
DropoutVoltage : Vdif (V)
0.4 0.3 0.2 0.1 0.0 0 50
Ta=25 Ta=-40
0.4 0.3 0.2 0.1 0.0
Ta=25 Ta=-40
100 150 200 250 OutputCurrent : IOUT1 (mA)
300
0
20
40 60 80 OutputCurrent : IOUT2 (mA)
100
XC6419(VOUT1=2.8V) VR1 0.5 DropoutVoltage : Vdif (V) 0.4 0.3 0.2 0.1 0.0 0 50 100 150 200 250 OutputCurrent : IOUT1 (mA) 300
CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=2.8V) VR2
CIN=1.0F(ceramic), CL2=1.0F(ceramic)
0.5
Ta=85
Ta=85 Ta=25 Ta=-40
DropoutVoltage : Vdif (V)
0.4 0.3 0.2 0.1 0.0 0 20
Ta=25 Ta=-40
40 60 80 OutputCurrent : IOUT2 (mA)
100
15/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3)- (3) Dropout Voltage vs. Output Current
XC6419(VOUT1=5.0V) VR1
CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=5.0V) VR2 0.5
CIN=1.0F(ceramic), CL2=1.0F(ceramic)
0.5
Ta=85
Ta=85
OutputVoltage : Vdif (V)
OutputVoltage : Vdif (V)
0.4 0.3 0.2 0.1 0.0 0 50
Ta=25 Ta=-40
0.4 0.3 0.2 0.1 0.0
Ta=25 Ta=-40
100 150 200 250 OutputCurrent : IOUT1 (mA)
300
0
20
40 60 80 OutputCurrent : IOUT2 (mA)
100
(4) Supply Current vs. Input Voltage (4)-
XC6419(VOUT1=0.8V) VR1 60
Ta=85
XC6419(VOUT2=0.8V) VR2 60
Ta=85
50 SupplyCurrent : ISS (A) 40 30 20 10 0 0 1
Ta=25 Ta=-40
50 SupplyCurrent : ISS (A) 40 30 20 10 0 0 1
Ta=25 Ta=-40
2 3 4 InputVoltage : VIN (V)
5
6
2 3 4 InputVoltage : VIN (V)
5
6
XC6419(VOUT1=1.5V) VR1 60
Ta=85
XC6419(VOUT2=1.5V) VR2 60
Ta=85
50 SupplyCurrent : ISS (A) 40 30 20 10 0 0 1
Ta=25
50 SupplyCurrent : ISS (A) 40 30 20 10 0
Ta=25 Ta=-40
Ta=-40
2 3 4 InputVoltage : VIN (V)
5
6
0
1
2 3 4 InputVoltage : VIN (V)
5
6
16/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4)- (4) Supply Current vs. Input Voltage (Continued)
XC6419(VOUT1=2.8V) VR1 60
Ta=85
XC6419(VOUT2=2.8V) VR2 60
50 SupplyCurrent : ISS (A) 40 30 20 10 0 0 1
Ta=25 Ta=-40
50 SupplyCurrent : ISS (A) 40 30 20 10 0
Ta=85 Ta=25 Ta=-40
2 3 4 InputVoltage : VIN (V)
5
6
0
1
2 3 4 InputVoltage : VIN (V)
5
6
XC6419(VOUT1=5.0V) VR1 60 SupplyCurrent : ISS (A) SupplyCurrent : ISS (A) 50 40 30 20 10 0 0 1 2 3 4 InputVoltage : VIN (V) 5 6
Ta=85 Ta=25 Ta=-40
XC6419(VOUT2=5.0V) VR2 60 50 40 30 20 10 0 0 1 2 3 4 InputVoltage : VIN (V) 5 6
Ta=85 Ta=25 Ta=-40
(5) Output Voltage vs. Ambient (5)- Temperature
XC6419(VOUT1=0.8V) VR1
VIN=1.8V, CIN=1.0F(ceramic), CL1=2.2F(ceramic)
XC6419(VOUT2=0.8V) VR2
VIN=1.8V, CIN=1.0F(ceramic), CL2=2.2F(ceramic)
0.90 OutputVoltage : VOUT1 (V) OutputVoltage : VOUT2 (V)
0.90
0.85
0.85
0.80
IOUT1=1mA
0.80
IOUT2=1mA
0.75
IOUT1=10mA IOUT1=30mA
0.75
IOUT2=10mA IOUT2=30mA
0.70 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
0.70 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
17/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5)- Temperature (Continued) (5) Output Voltage vs. Ambient
XC6419(VOUT1=1.5V) VR1 1.60 OutputVoltage : VOUT1 (V)
VIN=2.5V, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=1.5V) VR2 1.60 OutputVoltage : VOUT2 (V)
VIN=2.5V, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
1.55
1.55
1.50
IOUT1=1mA
1.50
IOUT2=1mA
1.45
IOUT1=10mA IOUT1=30mA IOUT1=100mA
1.45
IOUT2=10mA IOUT2=30mA
1.40 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
1.40 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
XC6419(VOUT1=2.8V) VR1 2.90 OutputVoltage : VOUT1 (V)
VIN=3.8V, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=2.8V) VR2 2.90 OutputVoltage : VOUT2 (V)
VIN=3.8V, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
2.85
2.85
2.80
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
2.80
IOUT2=1mA
2.75
2.75
IOUT2=10mA IOUT2=30mA
2.70 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
2.70 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
XC6419(VOUT1=5.0V) VR1 5.20 OutputVoltage : VOUT1 (V)
VIN=6.0V, CIN=1.0F(ceramic), CL1=1.0F(ceramic)
XC6419(VOUT2=5.0V) VR2 5.20 OutputVoltage : VOUT2 (V)
VIN=6.0V, CIN=1.0F(ceramic), CL2=1.0F(ceramic)
5.10
5.10
5.00
IOUT1=1mA IOUT1=10mA IOUT1=30mA IOUT1=100mA
5.00
IOUT2=1mA IOUT2=10mA IOUT2=30mA
4.90
4.90
4.80 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
4.80 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
18/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6)- Temperature (6) Supply Current vs. Ambient
XC6419 VR1 50 SupplyCurrent : ISS (A) 40 30 20 10 0 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
VOUT1=0.8V VOUT1=1.5V VOUT1=2.8V VOUT1=5.0V VIN=VOUT1+1.0V
XC6419 VR2 50 40 30 20 10 0 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
VOUT2=0.8V VOUT2=1.5V VOUT2=2.8V VOUT2=5.0V VIN=VOUT2+1.0V
(7) EN Threshold Voltage vs. Ambient Temperature (7)EN-
XC6419 1.2 EN Threshold Voltage : VENH, VENL (V) 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 AmbientTemperature : Ta () 100
EN"H"LEVEL EN"L"LEVEL
SupplyCurrent : ISS (A)
19/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Rising Response Time (8)
XC6419(VOUT=0.8V) 3.0 2.0 Input Voltage : VIN (V) 1.0 0.0 -1.0 -2.0 -3.0 Time (40s/div)
tr=5s, Ta=25, VIN=01.8V, CL=2.2F(ceramic)
XC6419(VOUT=1.5V) 3.0 2.5 Output Voltage : VOUT (V) 2.0 1.5 1.0 0.5 0.0 Input Voltage : VIN (V) 3.0 2.0 1.0
Output Voltage tr=5s, Ta=25, VIN=02.5V, CL=1.0F(ceramic)
3.0 2.5 2.0 1.5 Output Voltage : VOUT (V) Output Voltage : VOUT2 (V) Output Voltage : VOUT (V)
Input Voltage
Input Voltage
Input Voltage IOUT=0.1mA IOUT=1mA IOUT=30mA IOUT=100mA Output Voltage
0.0 -1.0 -2.0 -3.0 Time (40s/div)
Input Voltage IOUT=0.1mA IOUT=1mA IOUT=30mA IOUT=100mA
1.0 0.5 0.0
XC6419(VOUT=2.8V)
tr=5s, Ta=25, VIN=03.8V, CL=1.0F(ceramic)
XC6419(VOUT=5.0V) 6.0
tr=5s, Ta=25, VIN=06.0V, CL=1.0F(ceramic)
6.0 4.0 Input Voltage : VIN (V) 2.0 0.0 -2.0 -4.0 -6.0 Time (40s/div)
Output Voltage Input Voltage
8.0 6.0 Input Voltage : VIN (V) 4.0 2.0 0.0 -2.0 -4.0 Time (40s/div)
Input Voltage Input Voltage IOUT=0.1mA IOUT=1mA IOUT=30mA IOUT=100mA Output Voltage
12.0 10.0 8.0 6.0 4.0 2.0 0.0
5.0 4.0 3.0 2.0 1.0 0.0 Output Voltage : VOUT (V)
Input Voltage IOUT=0.1mA IOUT=1mA IOUT=30mA IOUT=100mA
(9) Input Transient Response (9)
XC6419(VOUT1=0.8V) VR1
tr=tf=5s, Ta=25, VIN=1.82.8V, CL1=2.2F(ceramic)
XC6419(VOUT2=0.8V) VR2
tr=tf=5s, Ta=25, VIN=1.82.8V, CL2=2.2F(ceramic)
3.8
Input Voltage
1.00 Output Voltage : VOUT1 (V) 0.95 0.90 0.85
Output Voltage
3.8
Input Voltage
1.00 0.95 0.90 0.85
Output Voltage
2.8 Input Voltage : VIN (V) 1.8 0.8 -0.2
IOUT1=0.1mA
2.8 Input Voltage : VIN (V) 1.8 0.8 -0.2 -1.2 -2.2 Time (100s/div)
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
0.80
IOUT1=1mA IOUT1=30mA IOUT1=100mA
0.80 0.75 0.70
-1.2 -2.2
0.75 0.70
Time (100s/div)
20/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) (9) Input Transient Response (Continued)
XC6419(VOUT1=1.5V) VR1 4.5 3.5 Input Voltage : VIN (V) 2.5 1.5
Output Voltage tr=tf=5s, Ta=25, VIN=2.53.5V, CL1=1.0F(ceramic) Input Voltage
XC6419(VOUT2=1.5V) VR2 1.70 Output Voltage : VOUT1 (V) 1.65 1.60 1.55 1.50 4.5 3.5 Input Voltage : VIN (V) 2.5 1.5
Output Voltage tr=tf=5s, Ta=25, VIN=2.53.5V, CL2=1.0F(ceramic) Input Voltage
1.70 Output Voltage : VOUT2 (V) Output Voltage : VOUT2 (V) Output Voltage : VOUT2 (V) 1.65 1.60 1.55 1.50
0.5
IOUT1=0.1mA
0.5 -0.5 -1.5 Time (100s/div)
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
-0.5 -1.5
IOUT1=1mA IOUT1=30mA IOUT1=100mA
1.45 1.40
1.45 1.40
Time (100s/div)
XC6419(VOUT1=2.8V) VR1 5.8 4.8 Input Voltage : VIN (V) 3.8 2.8
Output Voltage tr=tf=5s, Ta=25, VIN=3.84.8V, CL1=1.0F(ceramic) Input Voltage
XC6419(VOUT2=2.8V) VR2
tr=tf=5s, Ta=25, VIN=3.84.8V, CL2=1.0F(ceramic)
3.00 Output Voltage : VOUT1 (V) 2.95 2.90 2.85 2.80
5.8
Input Voltage
3.00 2.95 2.90 2.85
Output Voltage
4.8 Input Voltage : VIN (V) 3.8 2.8 1.8 0.8 -0.2 Time (100s/div)
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
1.8
IOUT1=0.1mA
2.80 2.75 2.70
0.8 -0.2
IOUT1=1mA IOUT1=30mA IOUT1=100mA
2.75 2.70
Time (100s/div)
XC6419(VOUT1=5.0V) VR1 6.5 6.0 Input Voltage : VIN (V) 5.5 5.0
Output Voltage tr=tf=5s, Ta=25 VIN=5.56.0V, CL1=1.0F(ceramic) Input Voltage
XC6419(VOUT1=5.0V) VR2 5.20 Output Voltage : VOUT1 (V) 5.15 5.10 5.05 5.00 6.5 6.0 Input Voltage : VIN (V) 5.5 5.0
Output Voltage tr=tf=5s, Ta=25 VIN=5.56.0V, CL1=1.0F(ceramic) Input Voltage
5.20 5.15 5.10 5.05 5.00
4.5
IOUT1=0.1mA
4.5 4.0 3.5 Time (100s/div)
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
4.0 3.5
IOUT1=1mA IOUT1=30mA IOUT1=100mA
4.95 4.90
4.95 4.90
Time (100s/div)
21/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) (10) Load Transient Response
XC6419(VOUT1=0.8V) VR1 0.85 Output Voltage : VOUT1 (V) 0.80 0.75 0.70
Output Current VIN=1.8V, tr=tf=5s, Ta=25 IOUT1=0.150mA, CIN=CL1=2.2F(ceramic) Output Voltage
XC6419(VOUT2=0.8V) VR2 250 Output Current : IOUT1(mA) 200 150 100 Output Voltage : VOUT2 (V) 0.85 0.80 0.75 0.70
Output Current VIN=1.8V, tr=tf=5s, Ta=25 IOUT2=0.150mA, CIN=CL2=2.2F(ceramic) Output Voltage
250 200 150 100 Output Current : IOUT2 (mA) Output Current : IOUT2 (mA) Output Current : IOUT2 (mA)
0.65 0.60 Time (200s/div)
50mA
50 0
0.65 0.60 Time (200s/div)
50mA
50 0
0.1mA
0.1mA
XC6419(VOUT1=1.5V) VR1 1.55 Output Voltage : VOUT1 (V) 1.50 1.45 1.40
Output Current
XC6419(VOUT2=1.5V) VR2 250 Output Current : IOUT1 (mA) 200 150 100 Output Voltage : VOUT2 (V) 1.55 1.50 1.45 1.40
Output Current
VIN=2.5V, tr=tf=5s, Ta=25 IOUT1=0.150mA, CIN=CL1=1.0F(ceramic)
Output Voltage
VIN=2.5V, tr=tf=5s, Ta=25 IOUT2=0.150mA, CIN=CL2=1.0F(ceramic)
Output Voltage
250 200 150 100
1.35 1.30 Time (200s/div)
50mA
50 0
1.35 1.30 Time (200s/div)
50mA
50 0
0.1mA
0.1mA
XC6419(VOUT1=2.8V) VR1 2.85 Output Voltage : VOUT1 (V) 2.80 2.75 2.70
Output Current VIN=3.8V, tr=tf=5s, Ta=25 IOUT1=0.150mA, CIN=CL1=1.0F(ceramic) Output Voltage
XC6419(VOUT2=2.8V) VR2 250 Output Current : IOUT1 (mA) 200 150 100 Output Voltage : VOUT2 (V) 2.85 2.80 2.75 2.70
Output Current VIN=3.8V, tr=tf=5s, Ta=25 IOUT2=0.150mA, CIN=CL2=1.0F(ceramic) Output Voltage
250 200 150 100
2.65 2.60 Time (200s/div)
50mA
50 0
2.65 2.60 Time (200s/div)
50mA
50 0
0.1mA
0.1mA
22/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) (10) Load Transient Response (Continued)
XC6419(VOUT1=5.0V) VR1 5.05 Output Voltage : VOUT1 (V) 5.00 4.95 4.90
Output Current VIN=6.0V, tr=tf=5s, Ta=25 IOUT1=0.150mA, CIN=CL1=1.0F(ceramic) Output Voltage
XC6419(VOUT2=5.0V) VR2 250 Output Current : IOUT1 (mA) 200 150 100 Output Voltage : VOUT2 (V) 5.05 5.00 4.95 4.90
Output Current VIN=6.0V, tr=tf=5s, Ta=25 IOUT2=0.150mA, CIN=CL2=1.0F(ceramic) Output Voltage
250 200 150 100 Output Current : IOUT2 (mA) Output Voltage : VOUT2 (V) Output Voltage : VOUT2 (V)
4.85 4.80 Time (200s/div)
50mA
50 0
4.85 4.80 Time (200s/div)
50mA
50 0
0.1mA
0.1mA
(11) EN Rising Response (11)EN Time
XC6419(VOUT1=0.8V) VR1 3.0 EN1 Input Voltage : VEN1 (V) 2.0 1.0 0.0 -1.0
Output Voltage tr=5s, Ta=25 VIN=1.8V, VEN1=01.8V, CIN=CL1=2.2F(ceramic)
XC6419(VOUT2=0.8V) VR2 3.0 EN2 Input Voltage : VEN2 (V) Output Voltage : VOUT1 (V) 2.5 2.0 1.5 1.0 0.5 0.0 3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 Time (20s/div)
Output Voltage tr=5s, Ta=25 VIN=1.8V, VEN2=01.8V, CIN=CL2=2.2F(ceramic)
3.0 2.5 2.0 1.5 1.0 0.5 0.0
EN1 Input Voltage
EN2 Input Voltage
EN1 Input Voltage IOUT1=0.1mA IOUT1=1mA IOUT1=30mA IOUT1=100mA
EN2 Input Voltage IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
-2.0 -3.0 Time (20s/div)
XC6419(VOUT1=1.5V) VR1 3.0 EN1 Input Voltage : VEN1 (V) 2.0 1.0
Output Voltage tr=5s, Ta=25 VIN=2.5V, VEN1=02.5V, CIN=CL1=1.0F(ceramic)
XC6419(VOUT2=1.5V) VR2 3.0 EN2 Input Voltage : VEN2 (V) 2.5 2.0 1.5 1.0 0.5 0.0 3.0 2.0 1.0
Output Voltage tr=5s, Ta=25 VIN=2.5V, VEN2=02.5V, CIN=CL2=1.0F(ceramic)
3.0 2.5 2.0 1.5 1.0
EN1 Input Voltage
EN2 Input Voltage
Output Voltage : VOUT1 (V)
0.0 -1.0 -2.0 -3.0 Time (20s/div)
0.0 -1.0
EN2 Input Voltage
EN1 Input Voltage IOUT1=0.1mA IOUT1=1mA IOUT1=30mA IOUT1=100mA
-2.0 -3.0
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
0.5 0.0
Time (20s/div)
23/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11) EN Rising Response (11)EN Time (Continued)
XC6419(VOUT1=2.8V) VR1 6.0 EN1 Input Voltage : VEN1 (V) 4.0 2.0 0.0 -2.0 -4.0 -6.0 Time (20s/div)
Output Voltage tr=5s, Ta=25 VIN=3.8V, VEN1=03.8V, CIN=CL1=1.0F(ceramic)
XC6419(VOUT2=2.8V) VR2 6.0 EN2 Input Voltage : VEN2 (V) Output Voltage : VOUT1 (V) 5.0 4.0 3.0 2.0 1.0 0.0 6.0 4.0 2.0
Output Voltage tr=5s, Ta=25 VIN=3.8V, VEN2=03.8V, CIN=CL2=1.0F(ceramic) EN2 Input Voltage
6.0 Output Voltage : VOUT2 (V) Output Voltage : VOUT2 (V) 5.0 4.0 3.0 2.0
EN1 Input Voltage
0.0 -2.0
EN2 Input Voltage
EN1 Input Voltage IOUT1=0.1mA IOUT1=1mA IOUT1=30mA IOUT1=100mA
-4.0 -6.0
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
1.0 0.0
Time (20s/div)
XC6419(VOUT1=5.0V) VR1 8.0 EN1 Input Voltage : VEN1 (V) 6.0 4.0 2.0 0.0 -2.0 -4.0 Time (20s/div)
EN1 Input Voltage IOUT1=0.1mA IOUT1=1mA IOUT1=30mA IOUT1=100mA
XC6419(VOUT2=5.0V) VR2 12.0 EN2 Input Voltage : VEN2 (V) 10.0 8.0 8.0 6.0 4.0 2.0 0.0 -2.0 -4.0 Time (20s/div)
EN2 Input Voltage IOUT2=0.1mA IOUT2=1mA
tr=5s, Ta=25 VIN=6.0V, VEN1=06.0V, CIN=CL1=1.0F(ceramic) EN1 Input Voltage
tr=5s, Ta=25 VIN=6.0V, VEN2=06.0V, CIN=CL2=1.0F(ceramic) EN2 Input Voltage
12.0 10.0 8.0
Output Voltage : VOUT1 (V)
Output Voltage
6.0 4.0 2.0 0.0
Output Voltage
6.0 4.0 2.0 0.0
(12) Ripple Rejection Rate (12)
XC6419(VOUT1=0.8V) VR1 80
Ta=25, VIN=1.8V+0.5Vp-pAC, CL1=2.2F(ceramic)
XC6419(VOUT2=0.8V) VR2
Ta=25, VIN=1.8V+0.5Vp-pAC, CL2=2.2F(ceramic)
80
Ripple Rejection Rate : PSRR (dB) Ripple Rejection Rate : RR (dB)
60
Ripple Rejection Rate : PSRR(dB) Ripple Rejection Rate : RR (dB)
60
40
IOUT1=0.1mA IOUT1=1mA
40
20
IOUT1=30mA IOUT1=100mA
20
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
24/29
XC6419
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(12) (Continued) (12) Ripple Rejection Rate
XC6419(VOUT1=1.5V) VR1 80
Ta=25, VIN=2.5V+0.5Vp-pAC, CL1=1.0F(ceramic)
XC6419(VOUT2=1.5V) VR2
Ta=25, VIN=2.5V+0.5Vp-pAC, CL2=1.0F(ceramic)
80
Ripple Rejection Rate : PSRR(dB) Ripple Rejection Rate : RR (dB)
Ripple Rejection Rate : PSRR(dB) Ripple Rejection Rate : RR (dB)
60
60
40
IOUT1=0.1mA IOUT1=1mA IOUT1=30mA IOUT1=100mA
40
20
20
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
XC6419(VOUT1=2.8V) VR1
Ta=25, VIN=3.8V+0.5Vp-pAC, CL1=1.0F(ceramic)
XC6419(VOUT2=2.8V) VR2
Ta=25, VIN=3.8V+0.5Vp-pAC, CL2=1.0F(ceramic)
Ripple Rejection Rate : PSRR (dB) Ripple Rejection Rate : RR (dB)
Ripple Rejection Rate : PSRR (dB) Ripple Rejection Rate : RR (dB)
80
80
60
60
40
IOUT1=0.1mA IOUT1=1mA IOUT1=30mA IOUT1=100mA
40
20
20
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
XC6419(VOUT1=5.0V) VR1
Ta=25, VIN=5.75V+0.5Vp-pAC, CL1=1.0F(ceramic)
XC6419(VOUT2=5.0V) VR2 80
Ta=25, VIN=5.75V+0.5Vp-pAC, CL2=1.0F(ceramic)
Ripple Rejection Rate : :PSRR (dB) Ripple Rejection Rate RR (dB)
60
Ripple Rejection Rate : :PSRR (dB) Ripple Rejection Rate RR (dB)
80
60
40
IOUT1=0.1mA IOUT1=1mA IOUT1=30mA IOUT1=100mA
40
20
20
IOUT2=0.1mA IOUT2=1mA IOUT2=30mA
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
0 0.01
0.1 1 10 Ripple Frequency : f (kHz)
100
25/29
XC6419 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(13) Cross Talk (13)VR1VR2
XC6419(VOUT1=1.8V, VOUT2=2.8V) 1.90 Output Voltage(VR1) : VOUT1 (V) 1.85
Output Voltage(VR1 : 10mA) VIN=3.8V, tr=tf=5s, Ta=25 IOUT2=0.150mA, CIN=CL1=CL2=1.0F(ceramic)
XC6419(VOUT1=1.8V, VOUT2=2.8V) 250 Output Voltage(VR2) : VOUT2 (V) 200 150 100 50 0 Output Current(VR2) : IOUT2 (mA) 2.90 2.85
Output Voltage(VR2 : 10mA) VIN=3.8V, tr=tf=5s, Ta=25 IOUT1=0.150mA, CIN=CL1=CL2=1.0F(ceramic)
250 200 150 100 50 0 Output Current(VR1) : IOUT1 (mA)
1.80 1.75 1.70 1.65 Time (200s/div)
2.80 2.75 2.70 2.65 Time (200s/div)
Output Current VR2 : 0.1mA50mA)
Output Current VR1 : 0.1mA50mA)
26/29
XC6419
Series
PACKAGING INFORMATION
SOT-26
USP-6C
USP-6C Reference Pattern Layout
USP-6C
Reference Metal Mask Design
*The side of pins are not gilded, but nickel is used.
27/29
XC6419 Series
PACKAGING INFORMATION (Continued)
USP-6C Power Dissipation
Power dissipation data for the USP-6C is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data.
1.
Measurement Condition (Reference data) Condition: Ambient: Soldering: Board: Mount on a board Natural convection Lead (Pb) free Dimensions 40 x 40 mm (1600 mm in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Thickness: Glass Epoxy (FR-4) 1.6 mm
2
Through-hole: 4 x 0.8 Diameter Evaluation Board (Unit: mm) 2. Power Dissipation vs. Operating temperature Board Mount (Tj max = 125 )
Ambient Temperature 25 85
Power Dissipation PdmW 1000 400
Thermal Resistance (/W) 100
Pd vs. Ta
Power Dissipation PdmW
1200 1000 800 600 400 200 0 25 45 65 85 105 Ambient Temperature Ta 125
28/29
XC6419
Series
1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD.
29/29

▲Up To Search▲

Price & Availability of XC6419AD18EL

	To Download XC6419AD18EL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .